MY MIRROR PLUS / MIRRORS BY SHAPE

Pill-Shaped Mirrors.
Clean Lines.
Rounded Ends.

Capsule mirrors for bathroom collections, dressing spaces and coordinated hotel interiors. Develop the proportion, orientation and finish around your market.

Explore the Collection

VERTICAL & HORIZONTAL / LED & NON-LIT

Complete capsule-shaped LED mirror in a bathroom design concept
A horizontal capsule: straight upper and lower edges, rounded ends.

UNDERSTAND THE OUTLINE

A Capsule Is Not an Ellipse.

The straight middle section gives a pill-shaped mirror its character. Its two semicircular ends share the same radius, creating a repeatable outline for glass, framing and lighting.

Straight middle sectionSemicircle + straight section + semicircle

Illustrative geometry. A custom rounded outline should be specified with its own drawing.

FOUR PRODUCT DIRECTIONS

From a Wide Reflection to a Slender Pair.

Different orientations, frame details and light distributions create different products. Images are concept renders for design development.

INTERACTIVE PROPORTION STUDY

Rotate the Brief. Not the Finished Product.

Compare capsule proportions and orientation. Each installation direction needs its own review of mounting and electrical details.

1000 mm width600 mm height

Choose an orientation

1000 × 600 mm

End radius: 300 mm
Straight section: 400 mm

A wider surface can connect the vanity composition. Check the usable reflection area against basin positions and room sightlines.

Outline study only. Sizes are examples, not stock availability or approved installation dimensions.

Use This Size in My Enquiry

PERIMETER & FINISH

Choose What Happens at the Edge.

Coordinate the glass outline, frame and lighting as one assembly.

Frameless backlit

A clear face with light behind the mirror. Confirm rear clearance and how the wall surface affects the halo.

Frameless front-lighted

A diffused band follows the capsule inside the glass perimeter. Define band width and the remaining reflection area.

Framed LED

A metal profile outlines the straight sides and curved ends. Review the finish, joint details and light path on the sample.

Framed non-lit

No LED or driver. Concentrate on the frame profile, reflective glass area and installation hardware.

Full vertical front-lighted capsule mirror above a basin, concept render
Plan the controls around the curve and the reflection zone.

FUNCTIONS WITH A PLANNED LOCATION

Keep the Face Clear.
Make Controls Easy to Reach.

Lighting & dimming
Confirm colour temperature, brightness adjustment and switching behaviour. Review continuity through both curved ends.
Touch controls
Agree icon size and position relative to the lower curve, light band and basin. Check the selected location on the sample.
Demister option
Define the heated area and operating sequence for review. The demister must fit the rear layout without conflicting with other components.
Driver & cable access
Coordinate the driver, cable exit and mounting system with the chosen orientation and service access.

INSTALLATION PLANNING

Set the Centres Before the Fixings.

01

Single vertical

Align to the basin or agreed wall axis. Check the lower arc against tap height and the upper arc against the available wall height.

02

Horizontal layout

Coordinate the long axis with the vanity. Confirm the fixing arrangement and prevent controls or cable exits from ending up in unsuitable positions.

03

Paired installation

Use the same outline and shared top and bottom levels. Review basin centre spacing, side gaps and electrical points on one elevation.

Fixing types, mounting heights and clearances are confirmed for the actual product, wall and project conditions.

PACKING & PRODUCT IDENTITY

Protect the Ends.
Identify Every Variant.

A capsule range needs a clear link between the product drawing, finish sample and carton label. Review packaging for the actual assembly and shipment route.

  • Support the curved ends and protect the glass and frame surfaces.
  • Separate mounting hardware from the mirror face.
  • Mark width × height, orientation, finish and model revision.
  • Include the agreed installation and electrical information.
  • Approve the packing sample and any required transport-test plan.
Full champagne framed non-lit capsule mirror in a navy dressing room, concept render
Decorative non-lit versions can complement the bathroom range.

WHOLESALE / PRIVATE LABEL / PROJECTS

Build a Capsule Family Around Your Brief.

Keep the outline consistent while defining each size, finish and function combination clearly.

Range planning

Identify target sizes, orientation, LED and non-lit variants, and quantities for each model. Share your finish references and destination market.

Drawing & sample

Review the capsule geometry, glass, frame, lighting and mounting. Approve physical finish and function samples before releasing the order.

Order & delivery

Confirm the approved revision, branding, packing and delivery grouping. Production timing and shipment arrangements follow the agreed order.

Discuss Your Capsule Mirror Range

PILL-SHAPED MIRROR FAQ

Specify the Shape with Confidence.

What makes a mirror pill-shaped rather than oval?

A pill or capsule has two straight parallel sides joined by semicircular ends. An ellipse has continuously changing curvature with no straight side section. Confirm the outline in the drawing rather than relying on the name alone.

Can the same design be supplied vertically and horizontally?

Both orientations can be developed. Fixing positions, driver layout, cable exit, controls and any demister must be designed for the intended orientation. A finished vertical model should not be assumed suitable for rotation.

How do we specify the end radius?

For a true capsule, the end radius is half the short dimension. The straight middle section equals the long dimension minus the short dimension. If your reference uses another curve, supply the outline file for review.

Can the lower rounded end include touch controls?

Control positions can be reviewed against the glass shape, frosted light band and rear component space. Agree their location on the approved drawing and check access on the sample.

Can LED and non-lit versions belong to one collection?

Yes, a collection brief can include both. Frame finish and outline can be coordinated, while rear construction, depth, mounting and packing need separate review for each assembly.

What information is needed for a wholesale quotation?

Provide width × height, orientation, frame and lighting requirements, quantities per variant, destination market and packing needs. Price, MOQ and sample or production timing are confirmed against the actual specification.

START YOUR CAPSULE MIRROR BRIEF

Your Proportions.
Your Collection.

Share sizes, quantities, finishes and lighting requirements. Include a drawing or reference link so the capsule outline and intended installation are clear.

sales@mymirrorplus.com

WeChat

Scan this WeChat QR code to add our contact