Backlit bathroom mirror with USB-A and USB-C provision in a slim side return
Product design concept / port module and output follow approval

MY MIRROR PLUS / Integrated charging

USB & USB-C Bathroom Mirrors

Develop a charging point alongside the mirror. Compare USB-A, USB-C and combination modules for hotel bathrooms, private-label ranges and wholesale mirror collections.

Compare Charging Ports

Start with the device

Put the charging requirement in the brief.

Device & cable

Identify what should connect and which cable is expected. Review the complete source, cable and device combination.

Output & protocol

Record the required charging output and protocol. Connector type and supported charging capability are separate approval items.

Single or shared use

State whether several devices may charge together. Ask for the proposed per-port output and any shared limit in the specification.

Connector comparison

Choose the port mix for your collection.

USB-A + USB-C

Two connector types in one brief.

If both ports may be occupied together, state the required simultaneous use. Review per-port output and any shared power allocation with the proposed module.

Use This Port Configuration
Underside mirror module showing rectangular USB-A and oval USB-C ports side by side
Connector concept / final aperture, module and ratings are model-specific

Mirror collection

Charging options across mirror formats

Round Halo USB Mirror in an interior setting

Backlit / USB-A + USB-C

Round Halo USB Mirror

A circular LED bathroom mirror with a discreet charging module. Locate the port where a cable can reach the agreed device resting place.

Specify This Design
Champagne Oval USB-C Mirror in an interior setting

Front-lighted / USB-C

Champagne Oval USB-C Mirror

A slim oval with a compact USB-C connection. Coordinate the return depth, port opening and the space around a connected plug.

Specify This Design
Dressing Mirror with USB Ports in an interior setting

Non-lit / USB-A + USB-C

Dressing Mirror with USB Ports

A full-length format for dressing suites and coordinated interior ranges. Review the module height and nearby surface for the intended charging use.

Specify This Design

Concept renders show design and placement directions. Actual components, charging functions and construction are confirmed on the approved model.

Availability & controls

Agree when charging should be available.

Mirror lighting off

State whether charging should remain available when the LEDs are switched off. Confirm the intended behaviour with the proposed power arrangement.

Room power restored

Review what happens when wall power is disconnected and restored. Include any room-control or guest-suite switching requirement.

Several devices connected

Test the intended simultaneous use. Record how the module allocates output and which combinations are approved.

Rear mirror assembly concept with a sealed charging enclosure and side module provision
Rear housing concept / source module, mounting and access require review

Behind the ports

Develop the charging module with the rear assembly.

Module & enclosure
Reserve space for the proposed charging source and port body. Show the module depth and aperture on the section drawing.
LED & demister layout
Coordinate charging components with the LED driver, optional heater and hanging hardware.
Connection & access
Record supply entry and required service clearance in the complete assembly drawing. Review the installation arrangement for the destination.

Hotel & apartment projects

Coordinate the charging point with the guest space.

For a hotel bathroom mirror with USB charging, show the basin, tap, shelves and device resting area on the elevation. Review the plug and cable in the intended user position.

Where two mirrors are installed together, define the port mix and access for each unit. Keep room schedules, mirror codes and operating guidance aligned across the project.

Hospitality Mirror Supply
Hotel double vanity with paired LED mirrors and discreet charging modules
Hospitality concept / mirror, cable path and device placement are reviewed together

Placement & cable planning

Give the connector room to be used.

Side return

Mark the preferred side from the front elevation. Check the plug body against walls, cabinets and neighbouring mirrors.

Underside

Review downward access and the route toward the vanity. Coordinate with the tap and backsplash.

Device support

Identify a suitable resting surface in the room layout and the expected cable length. Review the intended use in the mock-up.

Technical comparison

Compare more than the connector opening.

RequirementProvide for quotationConfirm before order release
Connector mixUSB-A, USB-C or combined; number of portsSelected module and aperture layout
Charging outputIntended devices and required charging performanceRated per-port output and supported protocol
Simultaneous useExpected device combinationsShared capacity and approved operating combinations
Control arrangementLED-off and room power requirementsCharging availability in each state
Project configurationDestination, installation and required documentsComplete approved assembly and product information

OEM / ODM & wholesale

Develop a clear USB charging mirror specification.

For bathroom brands and distributors, connect the approved port configuration to each size, finish and lighting variant. Keep charging descriptions consistent on packaging and sales material.

  1. 01

    Device & port brief

    Define connector mix, intended devices, output and simultaneous-use needs.

  2. 02

    Drawing & component review

    Coordinate port placement, housing and the proposed power arrangement.

  3. 03

    Sample evaluation

    Review access, charging behaviour and controls with the agreed devices and cables.

  4. 04

    Order release

    Confirm model codes, market documentation, labels, packing and quantities.

USB mirror FAQ

Questions from wholesale and project buyers

Can a bathroom mirror have USB-A and USB-C ports?

A combined module can be reviewed. State how many ports are needed and whether they must operate together. The proposed output and internal power arrangement are confirmed for the model.

Does USB-C specify the charging speed?

USB-C identifies the connector. Charging output and supported protocols are separate specification items. Include any Power Delivery requirement in the brief and confirm it for the selected source, device and cable.

Do USB ports remain available when the mirror light is off?

Specify the required behaviour. Availability depends on the approved electrical arrangement and how the room supply is switched. Review LED-off and wall-power-restoration states on the sample.

Can the ports transfer data or connect audio devices?

State any data or accessory requirement separately. The charging proposal and product documentation should identify exactly which functions are supported.

Where can the charging module be placed?

Side and underside arrangements can be reviewed against the mirror housing and installation. Provide the vanity elevation, preferred plug direction and a suitable device resting place.

Can the same USB module be used for every market?

Provide the destination and project requirements. The source components, complete mirror assembly and required documentation are reviewed for the intended configuration.

What information is needed for an OEM quotation?

Send mirror sizes, quantities, port types, intended devices, charging requirements, destination and packaging brief. Include simultaneous-use and wall-switching requirements where relevant.

Shaver Socket Mirrors → · Touch Control Mirrors → · LED Mirror Cabinets →

Wholesale / Projects / Private label

Request a USB mirror proposal.

Share your mirror sizes, port mix and intended charging use. Include any specified protocol, output or room-control requirement.

sales@mymirrorplus.com

WeChat

Scan this WeChat QR code to add our contact