Face width
The visible metal border around the glass. Agree it against the overall mirror size and intended reflection area.
MY MIRROR PLUS / ALUMINIUM FRAME COLLECTION
Bring shape, finish and light into one considered product. Aluminium-framed mirrors for bathroom brands, wholesalers and hospitality interiors.
Explore the Collection
SPECIFY THE PROFILE
Two mirrors can share a finish and still feel very different. The visible metal width, side depth, glass position and joint detail determine how the product reads on the wall.
The visible metal border around the glass. Agree it against the overall mirror size and intended reflection area.
The front-to-back section of the frame. Coordinate it with the glass, rear assembly and mounting arrangement.
The way straight lengths or curves meet. Review alignment, transitions and visible seams on the physical sample.
FOUR PRODUCT DIRECTIONS

Round / Non-Lit
A warm metallic outline for powder rooms and decorative interiors. The frame face becomes part of the composition.
Specify diameter, visible frame width and the approved colour reference.
Specify This Design
Rectangle / Front-Lighted
A brushed silver profile defines a precise rectangular edge around an inset illuminated band.
Coordinate frame width, corner joints, light-band position and clear glass area.
Specify This Design
Arch / Non-Lit
A restrained dark profile follows the arch into straight sides, suited to dressing spaces and coordinated interior ranges.
Review the arch radius, frame transitions, surface texture and mounting orientation.
Specify This Design
Organic / Backlit
A curved bronze-tone edge gives a freeform mirror definition while rear illumination adds a wall halo.
Confirm the contour, bending feasibility, joint location and rear light clearance.
Specify This DesignConcept renders illustrate design directions. Actual frame sections, materials, finishes and lighting are confirmed through approved drawings and samples.

LOOK CLOSER
SURFACE TREATMENT & COLOUR
Define sheen and texture; review corner coverage and surface marks.
Agree the brushing direction and visible metallic texture.
Approve the warmth of the tone against your hardware and interior palette.
Specify the reference carefully; bronze names can describe very different colours.
Swatches are illustrative. Review anodising, coating or other treatment proposals for the selected profile and use. A physical sample is the finish approval reference.
LIGHTING & REAR CONSTRUCTION
Coordinate the inset diffuser with the frame face so the edge does not obstruct the intended light band. Confirm clear reflection area.
Review rear clearance and the frame return against the LED path. Assess the halo on a representative wall surface.
Focus on the glass, profile, support and wall fixing. Coordinate separate room lighting where illumination is needed.
BUILD A FRAME MIRROR BRIEF
DRAWING & SAMPLE CHECKLIST
| Specification | Define in the drawing | Review on the sample |
|---|---|---|
| Dimensions | Outer width × height, frame face and profile depth | Overall proportions, glass position and installation projection |
| Shape & joints | Corner geometry, bend radii and joint locations | Alignment, transitions and visible seams |
| Finish | Treatment route, colour reference and texture | Colour, sheen and consistency under agreed lighting |
| Electrical options | Light path, controls, cable exit and service access | Agreed functions, diffusion and access to connections |
| Mounting | Orientation, brackets and rear clearance | Fit, support and compatibility with the installation brief |
WHOLESALE & PROJECT SUPPLY
Link each size, shape, finish and light configuration to a model code and approved drawing revision.
Review corner support and surface protection. Separate mounting hardware from the glass and finished aluminium.
Agree labels, instructions and delivery grouping. Confirm quantities and packaging for the actual destination and shipping route.
ALUMINIUM FRAME MIRROR FAQ
Rectangular, round, arch and custom curved outlines can be reviewed. Profile selection, bending limits, joints and finish depend on the geometry. Agree the section and outline before sampling.
Visible face width describes the metal seen around the glass from the front. Depth describes how far the frame extends from front to back. The overall installed projection can also include rear components and mounting clearance.
Share a physical finish reference or an agreed colour standard. Colour, gloss, texture and treatment route need sample review. Screen images are design references and are not colour approval standards.
A coordinated range can include both, but the profile, light path, rear assembly and mounting may differ. Confirm each configuration on its own drawing rather than assuming identical construction.
Suitability depends on the selected material, surface treatment, assembly and intended environment. Confirm the project requirements, cleaning guidance and any required test evidence for the actual product. No blanket rating is implied by the frame material.
Provide shape, outer dimensions, frame face width and depth if defined, finish reference, lighting, quantities by variant, destination market and packing needs. MOQ, price and lead time are confirmed against the reviewed specification.
START YOUR ALUMINIUM FRAME PROGRAMME
Share your sizes, frame preferences, finish reference and quantities. Include profile drawings or product references where available.
sales@mymirrorplus.com